Cheap SS braided Oil cooler lines
Now you could spend a couple hundred $$ on lines from an RX-7 company (mazdatrix etc.). Or you could make your own for a LOT less. I made mine for $55cnd ($35usd) I removed the oil lines from the car. I cut off the metal sleeves that hold the stock rubber hose to the metal fittings, and pulled the stock hose off. The metal fittings on each end are actually barbed hose fittings. I then bought 3' of AN-10 steel braided rubber hose from a local performance car shop. I then took the hose and 4 fittings to a local hose/fittings store. We measured up the length and angle of the stock lines (you must make sure the angle of the fittings are right since they don't rotate). Then they clamped new sleeves on using some press machine.
The picture didn't turn out too well.
